Shortcuts are really useful. But you need to know where can you
find it in the fusion in case shortcuts don't work.
These are some of the fusion shortcuts I've collected from net.
General
§ Space Starts or stops interactive playback.
§ Ctrl+N Creates a new flow.
§ Ctrl+O Opens an existing flow.
§ Ctrl+S Saves the current flow.
§ Ctrl+Z Undoes the last change.
§ Ctrl+Y Redoes the last undo.
§ Ctrl+X Cuts the selected item to the clipboard.
§ Shift+Del Cuts the selected item to the
clipboard.
§ Ctrl+C Copies the selected item to the
clipboard.
§ Ctrl+Ins Copies the selected item to the
clipboard.
§ Ctrl+V Pastes the item from the clipboard.
§ Shift+Ins Pastes the item from the clipboard.
§ Ctrl+B Toggles display of the Bins.
§ Shift+Ctrl Simulates holding down the middle
mouse button. For use when panning without a three-button mouse.
§ Alt+Drag Holding down the Alt key while dragging
a center crosshair limits movement to horizontal or vertical motion.
§ ] Moves current time forward one frame.
§ [ Moves current time backward one frame.
§ Ctrl+[ Changes current time to the first frame
in the render range.
§ Ctrl+] Changes current time to the last frame in
the render range.
§ Alt+] Advances to the next keyframe.
§ Alt+[ Returns to the previous keyframe.
§ Ctrl+A Selects all tools in the flow, or all
keys in a selected spline.
§ Ctrl+1 Scales the active region to 100% size.
§ Ctrl+F Scales the active region to fit in the
view size.
§ Ctrl+R Scales the active region to a rectangle
(region zoom).
§ Numpad + Zooms in on the active region. Works in
all scalable areas of the interface.
§ Numpad - Zooms out on the active region . Works
in all scalable areas of the interface.
§ F1 Displays the online help for the selected
tool or objectys.
§ F2 Renames the selected tools.
§ F3 No Use
§ F4 Toggles to remove or show display views.
§ F5 Displays the flow view.
§ F6 Displays the console.
§ F7 Displays the timeline editor.
§ F8 Displays the spline editor.
§ F9 Displays the comments tab.
§ F10 Displays the tool controls.
§ F11 Displays the modifiers tab.
§ F12 Starts render.
Flow Only
§ 1 Views the selected tool on the left view.
§ 2 Views the selected tool on the right
view.
§ 3 Views the selected tool on an I/O
board or floating view.
§ 4+ Any additional views available.
§ `(tilde) Clears all views.
Display View
§ R Displays the red channel in the selected view.
§ G Displays the green channel in the selected view.
§ B Displays the blue channel in the selected view.
§ A Displays the alpha channel in the selected view.
§ M Displays the mask channel in the selected view.
§ C Displays a full color image in the selected view.
§ Z Displays the Z-buffer channel in the display view.
§ V Displays the subview.
§ Shift+V Swaps the contents of the view and the subview.
§ Ctrl+L Locks the display.
§ Ctrl+Q Toggles quad view on and off.
§ Ctrl+K Toggles display of tool controls.
§ Ctrl+G Toggles display of the guides.
§ Shift+H Toggles display of handles on spline keypoints.
§ Shift+K Toggles display of keypoints on splines.
§ , (comma) Switches the view to use the A image buffer.
§ . (period) Switches the view to use the B image buffer.
§ / Switches the view so that it shows both the A and B buffers
and enables splitwipe.
§ Shift+R-Arrow Increases a value in steps.
§ Shift+L-Arrow Decreases a value in steps.
§ Shift+U-Arrow Increases a value in steps.
§ Shift+D-Arrow Decreases a value in steps.
§ Ctrl+R-Arrow Slightly increases a value.
§ Ctrl+L-Arrow Slightly decreases a value.
§ Ctrl+U-Arrow Slightly increases a value.
§ Ctrl+D-Arrow Slightly decreases a value.
§ Shift+C Sets the active polyline to click append mode.
§ Shift+D Sets the active polyline to draw append mode.
§ Shift+I Sets the active polyline to insert and modify mode.
§ Shift+M Sets the active polyline to modify only mode.
§ Shift+N Sets the active polyline to done mode.
§ Shift+O Opens or closes the active polyline (connects last point to
first point).
§ Shift+P Publishes the selected keys in the polyline shape.
§ Shift+F Sets the selected keys to follow existing published points.
§ Shift+R Disables or enables rendering of polylines until during
manipulation of polyline.
§ Shift+B Enables the spline shaping mode.
§ E Displays the point editor dialog in the current display
view, or sets keyboard focus to point value controls in the spline and timeline
editors.
§ T Displays the ease in/out controls in the spline editor's
toolbar.
§ K Creates a keyframe on the selected spline at the current
mouse position.
§ S, Shift-S Smoothes all selected points on a spline or polyline. The
display view recognizes Shift-S only, while the spline and timeline editors
recognize both S and Shift-S.
§ L, Shift-L Linearizes all selected points on a spline or polyline. The
display view recognizes Shift-L only, while the spline and timeline editors
recognize both L and Shift-L.
§ I Sets all selected points of a spline to step in mode.
§ O Sets all the selected points of a spline to step out mode.
§ V Reverses the selected keyframes on a spline.
§ Ctrl+Drag Copies selected points of a spline or polyline to a new
segment.
§ S Scales the selected points of a polyline around position of
the mouse pointer.
§ T Twists the selected points of a polyline around position of
the mouse pointer.
§ X Scales the selected points of a polyline around position of
the mouse pointer.
§ Y Scales the selected points of a polyline around position of
the mouse pointer.
§ F2 Renames selected tool or tools.
§ Ctrl+G Creates a group from selected tools.
§ Ctrl+W Swaps the inputs on the selected tool in the flow.
§ Ctrl+L Toggles lock mode for the selected tool.
§ Ctrl+P Toggles pass-through mode for the selected tool.
§ Ctrl+U Toggles update mode for the selected tool.
§ Ctrl+F Displays the find tool dialog.
§ Ctrl+ShiftT+V Pastes an instance of a tool in the clipboard.
§ V Toggles display of the navigator.
§ K Creates a keyframe on the selected spline at the current
mouse position.
§ S Smoothes all selected points on a spline or polyline.
§ L Linearizes all selected points on a spline or polyline.
§ I Sets all selected points of a spline to step in mode.
§ O Sets all the selected points of a spline to step out mode.
§ V Reverses the selected spline.
§ Ctrl+Drag Copies selected points of a spline or polyline (display view
also).
§ Shift+G Displays guides list.
§ Ctrl+Shift+Dbl Sets the render range to the slider range.
§ Ctrl+Dbl-Click Sets the render range to the selected frame.
§ Ctrl+Drag Sets the render range to frames enclosed by
mouse drag.
Now I'm practicing on green screen editing on fusion. I'll post it here when I finish it.
Now I'm very happy. 'Coz yesterday we've got a new pet but we're still looking for a name.
May be .... I don't know....! Ummmm
